Want this question answered?
The wheel torque setting is 76
290 nm front wheel bearing 1.7 puma
185 ft.lbs/251 nm
Front wheel bearings are pressed in using a hydraulic press, no torque setting. However, the wheel hub retaining/axle nut that you need to remove and replace in order to change out the bearing needs to be torqued down to 233 ft-lb.
The front wheel bearing torque setting on a Renault Clio ranges between 112 to 174 ft lbs. One needs to use a 30 mm socket on a 1 inch air gun to loosen the nut.
Rear wheel bearing nut tork setting
Tighten it until the wheel stops spinning and then loosen it until it does spin. That's the way we ALWAYS did it, before the elite chose to "torque" them. Don't forget to put the cotter pin back in.
Front hub/wheel bearing torque is 190-210Nm.
Check the manual, Wheel nut torque, N·m (kgf·m, ft·lbf): 102.9 (10.5, 76)
what is the torque on front wheel bearings for 1998 honda accord
235nm
tourqe on 2001 front wheel bearings