Q: What is the torque specification for a 4.6 liter exhaust manifold to aluminum heads?

Write your answer...

The 1995 Honda Odyssey exhaust manifold bolt torque specification is 45 pounds. The exhaust manifold bolts should be torqued in 15 pound intervals.

intake manifold

The 1999 Pontiac cylinder head gasket bolt torque specification is 160 pounds. The intake manifold bolt torque specification is 90 pounds.

exhaust manifold to head nuts are 31 ft. lbs.

The first torque spec for Isuzu 2.6 exhaust manifold in 58 ft lb. It has a second torque spec which is 72 ft lb.

Exhaust manifold torque is 25 lb/ft with anti-seize lube.

Exhaust mainfold to cylinder head 22 ft-lbsExhaust manifold to header pipe 33 ft-lbsExhaust manifold bracket bolts 20 ft-lbs

Around 30ft lbs.

Torque for the 300 6 intake and exhaust manifolds is 28 to 32 foot pounds

The torque settings for the exhaust manifold lower heater shield bolts for?æa d16y5 is 96 in - lbs. The oil pan drain plug torque settings is 29 and exhaust pipe to manifold nuts is 25.?æ

10 ft lbs

25 ft. lbs.

45 ft.lbs.

22

Exhaust manifold torque on 5.7 L Chevy is 25 ft/lbs using anti-seize lubricant.

40 lbs

18 to 22 lbs

17 foot pounds.

29ft lbs

18 ft lbs

18 ft lb

28-33 ft lb

The 350 cubic inch Chevrolet intake manifold bolts have a torque specification of Haiti pounds psi. The bolts should be torqued at 40 pound intervals.

Exhaust pipe to manifold nuts, 15 to 22 ft-lbs.

Remove the intake manifold, exhaust manifold, and then remove the head. Scrap off the old gasket and install a new one. Reinstall the head and Torque the head bolts in the proper sequence. Reinstall the intake and exhaust manifold torque the bolts to the proper torque. This is a major repair and not for a novice to try.