0
What is the torque value for a 1966 mustang front wheel bearing?
Wiki User
∙ 14y ago
tighten to 17 to 25 ft lbs to seat the bearing, back off nut 1/2 turn and retighten to 10 to 15 ft lbs
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Torque value for 2006 Chevy silverado front hub?
The nut on the axelshaft is 177 ft. LBS. The 4 bolts on the bearing hub is 133ft. LBS.
What is the torque spec's of the front brake rotor and the front axle nut and the front brake caliper bolts of a 2005 harley davidson ultra classic?
2005 ultra classicTighten the axle nut to a torque value of 50-55 foot poundsTighten the slider caps to a torque value of (62-132 in-lbs) 5-11 ft-lbsTighten Front brake caliper torque 28-38 ft lbs
What is the torque value for the rear axle nut in a 1987 Corvette?
180 torque lbs too much and you F up the hub Bearing BE CAREFUL !! PS when sliding the 1/2 shaft spline in the bearing It is best to FREEZE the SPLINE in the refrigerator this shrinks the spline and slides in MUCH BETTER DO NOT BEAT IT IN !! you can damage the bearing like that !!
What is the torque value for front brake caliper 2000 Buick Lesabre?
33 Ft lbs
What is the torque value for cylinder head for Mazda 1998 model?
final torque is 59-64 Nm except the two in front of the cam sprocket these can only be done up to 12-16Nm
What is the torque value for a 1977 mustang II front wheel bearing?
Your local dealership can give you this info or you can go to the library and look up the tork settings in a auto repair manual. But, you still will need a tork wrench. If you don't have a access to a tork wrench a good rule of thumb is to snugg up the adjusting nut somewhat tight and then back off the nut 1/4 turn. This will put the tork setting very close to the manual recommended setting, and will be just fine.
What is the torque value of A325 bolt?
M20 -bolt, what is the torque value M24 M24
What is the torque limit value of a torque wrench?
300kgf.cm
What is this mustang's approximate value?
190,000
What is value of 1967 mustang?
If it is in mint condition the value is 10000000000
What is the torque value for the crankshaft pulley on a PT Cruiser?
The torque value is 100 ft.lb. or 136 n.m.
How do you torque bolts on a 350 Chevy to specified value?
torque wrench
