Rice pulling material is used to control gravity conditions in the spacecraft.Anyone who has rice puller can defy earth's gravity field.
Military applications: It is used in satellites to control volcanic eruptions and change gravity of a point on earth. Can threaten world peace if fallen into rogue nations.Can make people of a particular region to crawl in a war like scenario.
hi friends Rice puller is a metal it can be use in hair fall treatment being a Doctore i have done this test on my patient friends if u wants to sell u r Rp u can contact me directly my clinic is at bangalore all the things about rp are rumour Thanks regards, Dr, paramesh mob=9845966101
no
The best way is to use a Puller like a steering wheel puller.
use a harmonic puller
You can use a fuse puller, or needlenose pliers.
Many wheels and pulleys are very tight on the shaft and must be removed using a "puller". There are several types, some use jaws or clamps, others use bolts. The ones that use bolts come in different configurations with one of the configurations being "three bolt".What that means is that the puller is attached to the pulley or wheel using three bolts, then a center bolt is used to push the puller and wheel/pulley assembly off the shaft. Many wheels and pulleys are very tight on the shaft and must be removed using a "puller". There are several types, some use jaws or clamps, others use bolts. The ones that use bolts come in different configurations with one of the configurations being "three bolt".What that means is that the puller is attached to the pulley or wheel using three bolts, then a center bolt is used to push the puller and wheel/pulley assembly off the shaft.
Go to www.zzperformance.com and you will be able to rent a pulley puller do not use a regular pulley puller they. It is about 30 bucks to rent. It will take about an hour to do
It cooks rice.
remove center bolt and use the required puller
Remove anything that may obstruct pulley (belt, wheel, etc.). Your best bet is to use an impact gun to remove bolt in center of pulley (turn counter-clockwise and use safety goggles). After loosening bolt you need to use a harmonic puller to get pulley off crankshaft (do not use impact gun on puller). Tip: Unthread bolt about 1/4 inch from crank pulley then use puller, loosen puller and remove crank bolt a few more turns off crankshaft, then use puller again to slide crank pulley off crank again, keep repeating until it is off.
Use a puller. there are two holes on the in side of the pulley. I had to clamp the sides to the pully to the puller, the holes just stripped out. U could drill and re tap the holes to match the bolts on the puller.
Two choices: use the special distributor drive puller, or take the engine completely apart. I recommend the puller.