http://wiki.answers.com/Q/What_is_the_voltage_can_be_used_for_holiday_test_based_on_coating_thickness_and_what_is_reference_code_for_this"
Voltage determines a cable's insulation thickness, not its conductor thickness (or, more accurately, its cross-sectional area). It's current that determines the csa of a conductor, not voltage.
unregulated voltage minus series regulator transistor drop.
A: Analogue and digital converters need a reference to weight the input related to the value of the reference. Other applications includes comparator switching and instrumentation
It's a diagram showing the components and connections needed to build a voltage stabilizer. The diagram will show a power transistor and a voltage reference, such as a zener diode.
A voltage error circuit is called an error amplifier and happens when there are discrepancies between the voltage output and the reference voltage. A current error circuit happens when there is a disruption of flow in an ammeter.
In low voltage wires, the insulation factor of the coating determines the wire's voltage rating. A wire coating of cross linked poly vinyl is used as an insulation. High voltage transmission wires uses no coating on the wire
Voltage determines a cable's insulation thickness, not its conductor thickness (or, more accurately, its cross-sectional area). It's current that determines the csa of a conductor, not voltage.
They are frequently used to provide a voltage reference in voltage regulators.
no
The voltage does not depend on the gauge of the wire, but on the thickness and type of insulation.
You need to know the temperature of the reference junction and the voltage difference between the reference and sensing junctions. First, you convert the reference temperature to a voltage using the reverse equation or table for your thermocouple type. Then you sum that voltage with the measured voltage. Finally, you convert the summed voltage back to a temperature using the equation or table for the thermocouple type you are using. If the reference junction is at zero degrees C, you can skip the reference summing part. Before computer processing was easy and cheap, the reference junction was often kept in an ice water bath for that reason.
unregulated voltage minus series regulator transistor drop.
The voltage at which the adc converts the signal.... it can also be called a limit of an ADC.
The length ,thickness, and alloy of the filament determines its resistance. The lower the resistance, the lower the voltage required to power it.
If meant ac signal then it is grounded so that the reference voltage is 0 & we get +ve voltage.
Generally, the depletion region thickness is proportional to thehttp://www.answers.com/topic/square-root of the applied voltage; and http://www.answers.com/topic/capacitanceis inversely proportional to the depletion region thickness. Thus, the capacitance is inversely proportional to the square root of applied voltage.
A: Analogue and digital converters need a reference to weight the input related to the value of the reference. Other applications includes comparator switching and instrumentation