You should be asking, 'What is the potential reading of a positive wire....?', as 'voltage' means 'potential difference' and you can't have a potential difference on a wire! The positive wire has a potential of +110 V with respect to the negative wire.
Read more: What_is_the_voltage_reading_of_positive_wire_in_110V_dc
You should be asking, 'What is the potential reading of a positive wire....?', as 'voltage' means 'potential difference' and you can't have a potential difference on a wire! The positive wire has a potential difference of +110 V with respect to the negative wire.
110v
110V
The fact that it's supposed to. Voltage is stated as the difference between the two wires carrying electricity to the load. When they bring power to the house from the utility, you get two wires carrying 110v but they're 180 degrees out of phase. Imagine one carries positive 110v and the other carries negative 110v. If you hook one of these wires plus a neutral (zero volts) to the load, you get 110v--110v over 0v. If you hook both of them to the load, you get positive 110v over negative 110v, or 220v. So...red to white is 110v, black to white is 110v, red to black is 220v.
The breakdown voltage of a diode is the minimum voltage at which it conducts in both directions. If you have a 100-volt rectifier diode (1N4002) and you wire it into a 110v circuit, it will flow current in both directions and you'll get no rectification.
110V
220v and 110v are almost the only voltages used around the world because they are the most efficient.
You have burned something out in either the control circuit or the motor itself.
The commercial voltage in Taiwan is 110V. The frequency of this voltage that is supplied to homes and other places is 60Hz.
the voltage and frequency are 110v and 50(or)60hz because the devices which are invented in us are work at that voltage and it is efficient for that devices.
Answer for USA, Canada and countries running a 60 Hz power supply service. 220V in US, supplied as two separate 110V feeds. Your circuit breaker panel supplies both to large 220 V appliances (stove, A/C) and 1 leg=110V to regular circuits.
Yes, it will work on either voltage.