0
What is torque specs for belt pulley to harmonic balancer for 67 Pontiac GTO 400 engine?
Wiki User
∙ 12y ago
20 foot pounds of torque is called out for the water pump pulleys. The drive bolts on the balancer are the same size, count and diameter.
If you're worried, use a little loc-tite.
Good Stuff
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Where is the crankshaft sensor on a 1995 Pontiac Firebird?
It is behind the Harmonic balancer at the bottom pulley on your motor.
Is crank pulley same as harmonic balancer repair?
In most cases the crank pulley bolts to the balancer so the crank pulley would not be the same as the harmonic balancer.
What is the name of the pulley at the bottom of the engine that runs with the alternator belt?
Most likely called the harmonic balancer pulley.
Where is the crankshaft position sensor located on a 2002 impala 3.8L engine?
It is located behind the crankshaft harmonic balancer pulley on the bottom front of the engine. The right lower splash shield and harmonic balancer pulley must be removed to replace it.
Does the 1.6L engine in a 1993 Mazda 323 have a harmonic balancer?
Yes, located toward the bottom ot the engine at the end of the crankshaft. Mazda used an integrated harmonic balancer/belt pulley.
Where is the harmonic balancer on a 1990 Chevy lumina 3.1?
It is behind the very BOTTOM pulley on the front of the engine. The big pulley.
How to remove crank pulley?
On most newer cars, the crank pulley is one piece with the harmonic balancer.... Remove it with a harmonic balancer puller.
Where is the harmonic balancer on a 2000 Chevy Silverado?
The front bottom PULLEY on the engine is bolted to the blancer.
Where is the harmonic balancer on a 1998 Lincoln continental?
the harmonic balancer is the crankshaft pulley approx6 or 7 inch diameter lower pully center of engine the serp belt is driven by power pulley also have a retaining bolt in center
How do you remove a crankshaft pulley on a 67 Chevelle?
The crankshaft pulley unbolts from the harmonic balancer. The harmonic balancer can be removed from the crankshaft with a 3 bolt puller.
Where is the crank sensor on a 97 Bonneville 3.8 liter engine?
behind the harmonic balancer pulley, i believe.
Where is the Harmonic Balancer on 1996 Toyota Corolla?
On any motor, the harmonic balancer is on the front of the crankshaft. It is what the pulley is bolted to.
