Torque is used to absorb the twisting motion of a load line. Torque is used to measure how much force the object being twisted can rotate on its axis.
spring are subjected to torque or twisting moment when they subjected to load.As the load is applied both tensile or compressive the coil is subjected to twisting moment which is max at the centre and min at the circumference just opposite to the shaft.
What version of MMD do you have...
The shear center is the point on a beam cross section at which an applied shear force (lateral load or load parallel to the cross section) will produce bending but no twisting of the section. The center of twist is a point in a cross section that remains stationary when a twisting moment (torque) is applied on that cross section. The shear center and twist center are the same point only when the beam is rigidly supported.
The momentum of an object traveling with a certain velocity will increase if a load is added to it while in motion. This is because momentum is directly proportional to both mass and velocity, so adding mass will result in an increase in momentum as long as the velocity remains constant.
in strength of material, u studied shear force and bending moment diagram for static load ( load position is fixed) but influence line diagram is used to draw shear force diagram and bending moment diagram for moving load (load position varies with distance).. Recomended books, CS REDDY & BC PUNMIA.. or email me: parvez.civilengg@gmail.com
what is load line of transistor what is load line of transistor
well the difference mainly exists in the method of finding them , these are :-1. in finding DC load line :-open all AC sourcesopen all the capacitors2. for AC load line:-open all the Dc sourcesshort all the capacitors.
spring are subjected to torque or twisting moment when they subjected to load.As the load is applied both tensile or compressive the coil is subjected to twisting moment which is max at the centre and min at the circumference just opposite to the shaft.
The line wire will be hot and carrying power when the breaker is on. The load wire will not be hot and will have no voltage on it until it is connected with the line wire.
1. Lift with your knees. 2. Avoid twisting. 3. Hug the load.
no load voltage - full load voltage by full load voltage
when the dc supply given, dc load line lies in the Ic and Vcc. when the AC supply given, AC load line lies in the Ic and Vcc.
This question is similar to "How does linear motion function? With the exception of the planetary system, first it must be driven by power. When driven and no load applied to it, then its just an object in motion. In other words a motion without load or work whether it be rotation or linear motion does not serve a function.
A dc load line is formed by joining the 2 points wherin the slope is equal to the inverse of the load resistance.. whereas the ac load lin has a different slope... and it intersects the dc load line at the quiescent point.
The dc load resistance is Rc but the AC Load resistance is (RcRl). If a load line is drawn the slope of which is -1(Rc Rl) . Then it is called an AC load line and it is to be used when the transistor is operating as an amplifier.
Frequency is set by the supply, not by the load.
A: Vce is the voltage that will follow a particular load line. It is linear by itself but not related to the base drive.