dont remember the color exactly, but if the factory harness is still there, the clip side that you push in to remove the harness is positive
You can buy a speaker harness. An adapter that connect the positive and negative from the speaker into the stock harness.
The diagnostic connector is along the wiring harness, under the hood, on the passenger side firewall.The diagnostic connector is along the wiring harness, under the hood, on the passenger side firewall.
sounds like a short. if all or some speakers do it, it is probably in the radio, or the wiring harness. if only one speaker does it, it is the speaker or the wiring to that speaker.
A 1991 Dakota is not OBD2 compliant. It is OBD1, and the diagnostic connector is under the hood on the wiring harness on the passenger side firewall.A 1991 Dakota is not OBD2 compliant. It is OBD1, and the diagnostic connector is under the hood on the wiring harness on the passenger side firewall.
I am pretty sure it is just the radio wiring harness. I am guessing your car has no radio, but they put the radio wiring harness in anyway. On our car, which was a two door, the wiring went to both doors. It was extremely easy to put in a radio and speakers. The speaker size requirement for our doors was just a generic size speaker.
insisde tuck three nuts and wiring harness.
stock wire harness speaker wires are always Gray, White< purple< green
Begin by removing the speaker covers in your 2006 Toyota. Remove the speaker retaining screws. Remove the wiring harness from the back of the speaker.
Try these out ...... Radio 12v pink + radio harness Radio Ground black - radio harness Radio Ignition pink + radio harness Radio Illumination blue/black + radio harness Factory Amp Turn-on N/A Power Antenna green/black + radio harness LF Speaker +/- blue/red - yellow/black +,- radio harness RF Speaker +/- black - yellow +,- radio harness LR Speaker +/- brown - white +,- radio harness RR Speaker +/- green/orange - blue/orange +,- radio harness
It is on the wiring harness under the hood on the passenger side of the firewall.
Accesory DARK GREEN (+) RADIO HARNESS Ground BLACK (-) RADIO HARNESS Illumination GRAY (+) RADIO HARNESS Dimmer VIOLET/WHITE (-) RADIO HARNESS LF Speaker (+) TAN LF Speaker (-) GRAY RF Speaker (+) LIGHT GREEN RF Speaker (-) DARK GREEN LR Speaker (+) BROWN LR Speaker (-) YELLOW RR Speaker (+) DARK BLUE RR Speaker (-) LIGHT BLUE Steering Cntrls YES Speed Cntrl YES Radio Security YES
Remove the speaker covers, by loosening the retaining screws. Remove the speaker retaining screws. Remove the wiring harness. The speakers will come out.