This indicates the inner seal is bad and the water pump must be replaced.
That is the water pump weep hole. If coolant is coming out, the water pump has failed.That is the water pump weep hole. If coolant is coming out, the water pump has failed.
the water pump seal is worn out you need a new water pump
Are you sure you received to right water pump? I had this same problem with one of my cars and I found out that the holes in the water pump and the holes in my block didn't line up.
yes water is coming out of this little hole in the water pump
Follow the hose coming out of the top of the radiator; it feeds the water pump.
Yes. The seal for the water pump is bad. Replace it.
There could be several things wrong with your water fountain. 1. The Pump - Remove the pump and determine whether it is pumping water from the nozzle while plugged in. If not, you have a faulty pump and need to replace it. 2. If water is flowing just follow the tubing. If no water is coming through the tube take the tube off and blow through it. It could be blocked by debris. If clear, the pump has a pressure problem and needs to be replaced.
If you are coming from a city or county water main you do not need a water tank or pump system as the main should already be pressurized.
Probably not. If the water pump is gone it would be a separate issue
The bearing has failed in the water pump. The pump will need replaced.
So long as there is water coming through the pump when it is running it doesnt matter what the water level in the pool is.
Each time I backwash my pump head, the water comes out with extreme force. It has only trickled when something was going wrong. The pump may have been drawing air or the heads were dirty. During backwashing and rinsing, the water should be coming out with force. The pump pressure should even be lower when you return to filtering. Each time I backwash my pump head, the water comes out with extreme force. It has only trickled when something was going wrong. The pump may have been drawing air or the heads were dirty. During backwashing and rinsing, the water should be coming out with force. The pump pressure should even be lower when you return to filtering.