This was found in the operators manual for their pressure washers which can be found at (and there is a neat graph that shows oil type and temp. in the manual)
http://www.briggsandstratton.com/maint_repair/manual_and_more/docsearch.aspx?modellookfor=020388
Oil
Oil Recommendations
We recommend the use of Briggs & Stratton Warranty
Certified oils for best performance. Other high-quality
detergent oils are acceptable if classified for service SF, SG,
SH, SJ or higher. DO NOT use special additives.
Outdoor temperatures determine the proper oil viscosity for
the engine. Use the chart to select the best viscosity for the
outdoor temperature range expected.
* Below 40°F (4°C) the use of SAE 30 will result in hard starting.
** Above 80°F (27°C) the use of 10W30 may cause increased oil
consumption. Check oil level more frequently.
NOTE: Synthetic oil meeting ILSAC GF-2, API
certification mark and API service symbol with
"SJ/CF ENERGY CONSERVING" or higher, is an
acceptable oil at all temperatures. Use of synthetic
oil does not alter required oil change intervals.
100 inch/pounds
how many horse is a 190cc briggs engine
What is clearance magnetic 15 horse power briggs and stratton
that should be 6 horse it is 14 cid
SAE30
0.006"
148 cc is 3.5
190cc equals how much horse power?
I have a push mower with a 4.5 horse on it and it uses a champion j19lm.
696854 is the Briggs Filter on my 24 horse now that is probably a Sears part number.
Credit Card
I think they put a 8 horse Briggs and stratton in 'em.