Depends on what you want to test. The computer is of the OBDII family and produces codes that can be retrieved by plugging into the code reader port. It is usually under the dash on the drivers side. most auto parts stores will either read it for you or loan you a code reader. Most of the sensors can be diagnosed with a Multi-meter. You will need a meter that offers high impedence and cycle rates.
You might not need as much initial timing when it's on propane, but I'd start out with the factory setting for gas and call it good.
Depends on where you live. If you live in the far north get the largest CCA battery you can find. In the rest of the country a 450 CCA battery will do.
Check/replace the spark plugs and wires. If you're not going to replace the plugs make sure the gap is correct (should be either .040 or .060) and make sure the plugs are clean of oil or gas. If it still backfires after you replace the plugs/wires check the distributor and the timing.
how do i fix a dtc code 42 in a 1995 chev 6.5 diesel?
where is fuel filter loc on 1995 chev 1500 pickup and what does it loo like
no.
NO they will not. Ford and Chevy wheels are different.
There is no fixing it, replace it with a new one.
In the gas tank.
you take it to a shop
It is written in small print on the SIDE of the tire.
IN THE GLOVEBOX AREA RIGHT HAND SIDE
Stuck closed thermostat or a bad head gasket.
Up to 1994 will fit, Chev or GMC
what are the timing marks on a chev 305 motor for the year 1995.