The exhaust manifolds on a normal, properly tuned vehicle engine WILL NOT overheat to the point they glow unless you have a turbo setup. If this happens you have improper fuel mixture or the timing is off. Even a turbo setup should only have a small bit of orange glow and that's only if you're running the engine hard. This will help you:
http://www.hotrodders.com/forum/rebuilt-350-headers-get-bright-orange-170314.html
Should be on the passenger side of the engine screwed into the block by the starter. It is below the exhaust manifold.
You will need to remove the exhaust manifold retaining bolts in your 1993 Chevy Astro. Remove the exhaust manifold. Remove the exhaust manifold gasket and clean the surface. Reverse the process to install the new exhaust manifold gasket.
That thing on the top of the engine that looks like a carburetor, But it'sreally a Throttle body that's bolted onto the INTAKEUNDERSTAND.
It is located underneath the throttle cable assembly, behind the exhaust manifold. It is no shade tree mechanic job to replace this.
Exhaust leak at Exhaust manifold to head gasket or oring at exhaust manifold pipe.
\'02 Ventures use M8X1.25X98.5 exhaust manifold studs.
It is located on the bottom of the block, back at the far edge of it where it can engage the flywheel. It sits along side the block below the right exhaust manifold.
Bolted to the exhaust manifold.
It is located in the throttle body.
If the exhaust manifold gasket is leaking the only fix is to replace it with a new one.
The intake manifold distributes the air fuel mixture from the carburetor to the cylinders. The exhaust manifold collects the exhaust gases from the cylinders and directs them out the exhaust pipe.
Yes