Want this question answered?
A heavy steel ship can float because it is designed in a way that allows it to displace a large volume of water, which creates an upward buoyant force greater than its weight. On the other hand, a small steel ball bearing sinks because it is not able to displace enough water to generate an upward buoyant force greater than its own weight. Therefore, the relative buoyant forces are different, resulting in the ship floating and the ball bearing sinking.
volume of the billet * density of d material i.e for steel density is aprox 7.8*10^-6 . volume * 7.8*10^-6.
The bearing on a clock pendulum is usually two knife edges with a cross piece balanced upon it supporting the pendulum. Sometimes on cheaper clocks a very thin strip of springy steel is used.
same because of the mass
a big heavy steel ship floats on water because the volume is mostly air. trust me its true.
1.3 cm3
Did you mean determine manganese content in steel by converting it to permanganate and measuring it using visible spectroscopy? If so it is a standard method in many classical analytical text books. To read a recent paper on the subject see Ramachandra & Rashmi, The Analyst, Volume 124, 1099-1103 (1999)
what is the bearing cpacity of 50 mm steel plate
A heavy steel ship can float because it is designed in a way that allows it to displace a large volume of water, which creates an upward buoyant force greater than its weight. On the other hand, a small steel ball bearing sinks because it is not able to displace enough water to generate an upward buoyant force greater than its own weight. Therefore, the relative buoyant forces are different, resulting in the ship floating and the ball bearing sinking.
Carburizing is a method of hardening iron or steel by a heat treatment that causes it to absorb carbon liberated from a carbon bearing material, such as charcoal or carbon monoxide.
A steel ball is a ball, or sphere, made of steel. An example would be a ball bearing, and the whole world runs on bearings, many of which are of the ball bearing variety.
the volume of a steel sheet plate is < length *breath *height >
A ball bearing is a stainless steel ball used in 'bearing races' to make a full bearing unit. Vet common in all machinery construction.
The Volume of steel used should always be less than the volume of ship made out of it.The ratio could differ and hence there may be no specific ratio.The greater the (Ratio of Volume of ship:Ratio of Volume of steel used) say 3:1that means the ship can carry about 2 times the volume of the steel used.That means the water displaced would be 3 times volume of steel hence the water is applying the force on ship is 3 times weight of steel.***STUDY BUOYANCY
Steel is heavier than concrete for the same volume, however steel buildings are generally lighter. This is because steel buildings utilize high strength of steel, so volume of steel in steel buildings is much smaller than volume of concrete in concrete buildings. In another words in steel buildings much less volume of material is needed for the same strength compared to concrete buildings.
Steel Cannot be calculated based on cft. Load bearing capacity is required to calculate steel.
The primary materials consumed by the industry include alloy steel mill shapes. Cold steel and iron forgings, however, are also widely used in the bearing industry.