0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How will the work done on the input piston compare to the work done by the output piston in a hydraulic device?
The work done is equal
What if you have a cracked piston and a blown head gasket Can a 1998 mercury tracer be saved with these problems?
You will need to get a new engine....I had this done on my 1999 tracer...$2000 You will need to get a new engine....I had this done on my 1999 tracer...$2000
Why does car not start after timing belt has slipped on vauxhall astra mk4?
If this engine is an interference engine it may have done damage to valve, piston, or head. Or the timing is off so far that the engine will not start. Install a new timing belt correctly and start the engine. You will then know if any damage was done.
How can you do timing with no mark?
the only way to determine where tdc is to do the timing is to put a dial indicator on top of number 1 piston, can be done with the head on depending on what engine it is
How many hours does it take to change engine in 2000 Ford Taurus?
It can be done over a weekend for someone that's done an engine swap before.
How do you install a piston?
Most pistons are attached to the connecting rod with piston pin. These are either pressed into the side of the pistion using a hydaulic press or held in with clips. (Or both) You can compress the piston rings to fit in the cylinders by hand, or with a special ring compressor. I would suggest that someone who has done it before helps you.
What is oil scraper rings in any engine?
oil scraper rings are the rings on the pistons that scrape the excess oil off the cylander walls on the down stroke of each piston. this is done to remove excess oil from the combustion chamber in normal operation of an engine if this was not done you would always burn oil and forever be topping up oil in engine
Can you paste a piston facing up in Minecraft?
well it is very simple, Stand on The Block You want to place the piston on. Once that's done quickly jump and place the piston.
If the timing belt broke on a 1991 Mitsubishi eclipse what damage has it done to the engine or is the engine a contact engine?
There could be bent and/or broken valves. Possible damage to the cylinder head and valve guides. Could be damage to the top of the piston. Or you could br lucky and nothing happened.
What did people do before the steam engine?
Used human or animal effort to get things done.
Reciprocating aircraft engine piston cooling oil nozzle?
I am unsure what you are asking but: The cooling oil nozzle is arraigned so the underside of the piston is sprayed with oil to cool the piston crown. This is done on high stress engines as the pistons could and would overheat leading to detonation and other problems leading to engine failure. This system is also used on Cumin's diesel engines as used in Dodge trucks, race cars, heavy trucks and so on.
Fiat Multipla comes up engine fault contact garage loss of power but fault comes and goes told could be a sensor or turbo needs overhauling only done 44000 miles 53 plate?
Yes, so fiat multipla just come engine fault contact garage loss. That's simply the way thing go
