What other wheels will fit a 4x4 s10?
Corvette and Camaro wheels will fit a Blazer, direct bolt on. Some might need spacers in front or/and rear.
That really can't be answered. Are they stock? What are the sizes of the tires? What type of s10? What type of blazer? An s10 truck's tires should fit an s-10 blazer. A s-10 truck might be too small for a stock K5 blazer. The lug nut pattern from 1982 on s-10 pickup and s-10 blazer is 5x4.75 inches. OEM rims were 15x6 in 1982 and 15x7 from 1982 on. So s-10 pickup wheels would…
No. Camry wheels are 5 lugs on 4.5" span and S10 wheels are 5 lugs on 4.75" span. Also the Camry wheels are offset for a front wheel drive vehicle. 5x4.5" is common on 2WD Toyota trucks, some Toyota cars and a lot of Ford applications. 5x4.75" is a common small General Motors lug pattern. Common on S10 and kin and some minivans.
Will a trans out of a 2000 S-10 fit a 98 Astro van the only difference is see is the extra bolt at the top?
The S10 Blazer has a "double disconnect" 4wd system. It is disconnected at the transfercase and at the front differential. It is ok to tow it by the front of rear wheels with a Dolly and will not do any damage if not done for long distances. But remember, with any dolly towing there is a risk of damage.
No. Car and truck wheels will not interchange. This is incorrect. I put a set of rally wheels from a C3 vette on a 1996 Chevy S-10 and they fit fine. I also did the opposite. Put S-10 wheels and tires on my C3 vette. Chevy did not change the bolt pattern on the vette, firebird and camaro from 1968 on. The bolt pattern is 5X120.7. The only difference is the back spacing. THX