you need some oil and you also need to work hard
Yes you can install power steering. I have installed it in my 84 pickup. You will need the power steering box and the gear box with hoses. I pulled them off a pickup at a wrecking yard, which is best, since everything is already there and you can see how it is setup.
i need a parts break down on a 4t60e transmision ,flow chart of parts in correct order
Yes, you will need a conduit connector and wire connectors to install the KitchenAid Architect II Microwave oven.
The circumference of the car steering wheel for a 1966 Park Lane Mercury Breezeway is not available online, however part number is C5ZZ-3600-N and costs $224.95 from Macs Auto parts.
Look through your users manual to get started. This will explain the parts that are needed and how to install the new parts.
It must be pressed on. You need a special tool. Some auto parts store will lend you the tool if you buy the parts from them.
Most power steering pulleys require a special tool to remove and replace. Many auto parts stores will rent you the proper tools to do the job.
check this website for a list of parts needed to repair your column http://www.tbirdparts.com/main.htm click your year on the top left of the page and follow from there
There is no difference in Power Steering Fluid. Use any off the shelf at your local auto parts store, or department store.
You need a special tool available at some parts stores to rent and they can tell you how to use it.
It takes a special tool to remove the pulley and install the pulley. The tool can be rented from your local auto parts store.
first thing is you need to pull off the belts, and yes all of then because the stering belt in behind the others. then there is two bolts holding the pump so remove them and then just remove the high and low pressure lines and your done.