That is the knock sensor.
The crank sensor is behind the starter. Remover the starter at the back of the engine and you will see the sensor
on the passanger side. it i located on the trans housing where the engine and trans meet.
It is located directly above the starter. Remove the starter and you will see it going into the side of the engine block.
For the 2.2L engine, remove the starter. The sensor is screwed into the engine block behind the starter with a 10mm bolt. The wiring plugs into the front of the sensor facing the radiator.
The MAP is located in the engine compartment near the engine. Hope this helps you out!
Top of the engine on driver side of the valve cover and crank sensor is under the starter just move starter out of the way
It is screewed into the side of the engine over by the starter.
the senor is located on the front of the engine block right above the starter you need to drop the starter and oil filter to remove the sensor
Opposite side of the engine that the starter is located on, same height as the starter
It is located in the front of the engine, above the oil filter, next to the starter. Your going to have to remove the starter for easier access to the sensor.
Its at the backside of the engine..look in the area of were the starter is.you will find it there
On the 99 Olds Intrigue, the camshaft sensor is located on the rear of the engine. It is just above the starter.