My Toyota Sienna 2000 axle nut measures 30 mm Sprayed the threads as I will be replacing an axle shortly. Probably the same size.
76 ft/lb
there are 3 5mm Allen nuts in the front. these are easy. the weird part is the back. there is a Toyota symbol in the back center. twist it counterclockwise till the shield is released.
Changing a tire on a 2001 Toyota Solara is very easy to do. You will first need to jack the car up, then take a tire iron and take the lug nuts off the tire. After you have removed all of the lug nuts, you will then put the new tire on and put the lug nuts on and tighten them.
1. Remove the five lug nuts 2. Remove the tire 3. Remove the four lug nuts 4. Remove the two screws 5. Remove the drum from around the brakes 6. Remove the four nuts underneath that 7. Pull the axle out
# Simple, loosen lug nuts. Jack the truck up high enough that oil stays on oppsite u are working on. Meaning only jack up side u are working on. Then take ur lug nuts off and tire off. then take brake line loose. Then take emergency cable off. Then look behind drum there is 4 nuts around axle on back of drum cover. take thoose 4 nuts off. and axle will slide right out.
Pull internal roof carpet around aerial down just enough to access nuts. Loosen nuts to remove aerial body. www.displaypro.co.uk
It is a special 2 9/16 inch socket just for axle nuts.
rear axle nut is 65 ft/lbs
32 mm
the axle nut only holds the axle in the spindle. the rotor is held by the caliper and lug nuts when the wheel is on the car
36mm
Mixed Nuts - 2001 was released on: USA: 1 May 2001 (Los Angeles, California)