Want this question answered?
10mm
Look here: How do you change the starter on a 1996 Toyota Corolla?Prizm and Corolla engines are the same.
You need 54mm bore bolts for a caliper for a 1998 Chevy Prism.
1 1/8"
no. the size of a pully makes little difference to its action on a rope as the only thing changing is how much of the rope is in contact with the pully and since the pully rotates it makes it no easier or harder to pull the rope.
i don't know, as that car does not exist. prizm went to Chevy in 1998.
I had this on a 90 3800 engine and used a bypass pully from auto zone for $40 bucks same size as the compresser pully but you have otpull the compresser out first and install it in the same three mounting holes using the same three bolts.
crank sensor is located at the top of the transmission bell housing,two hex bolts that hold the crank sensor in place.
Probably 10 gallons (I own a 1996 Prizm with a 10 gallon tank).
I have a 1996 Prizm, and it has a 10 Gallon tank. Yours is most likely the same.
The tire size is usually 185/65/14.
65 teeth.