Want this question answered?
How to Remove the Steering wheel From a Chevy Blazer 2001
2 wheel drive
A 1996 Chevy Blazer Does have a transfer case IF it is equipped with 4 wheel drive
Located on the inside of the frame on the right side of the truck just in front of the rear wheel.
S-10 blazer early models had a remote mount on the drivers side of the engine compartment on a 4.3L.I found the easiest way to get to the oil filter is to remove the front drivers side wheel and reach straight through into the engine compartment. You may have to use a lever to move lines up a bit so you can get into it.Need to know what year, engine size and if it is two wheel drive or four wheel drive, it makes a difference.
There are many types of 4x4 rims that are suitable for a Chevy Blazer. The 4x4 rims that are suitable for a the vehicle known as a Chevy Blazer are the Capital Factory Wheel rims.
rear wheel drive or 4x4 capable
Cannot unlock steering wheel on 1991 S10 Chevy blazer.
Alot depends two wheel drive is on rear of engine where four wheel drive is on a remote oil cooler under access door below radiator
Look under the front bumper. There should be a metal panel with a small door which says "oil filter access". The Blazers tended to use a remote oil filter.
That would be 2 wheel ABS system.
The front wheel stud on a 1992 Chevy Blazer S10 can be changed by jacking the vehicle up, removing the wheel, and unbolting the caliper. The rotor assembly can then be removed, and the wheel stud pressed or hammered out of its seat.