there should be little screws that you screw out and they pop out and you twist the bulb to remove it
What fuse number is the License Plate on a 2003 Ford Winstar Van LX
Remove the screws that hold the covers in place. Replace bulbs!
To replace the headlight assembly on on 03 Jetta, the grill and front bumper have to be removed before you can get to the screws below the lamp.
Remove screws, remove light assembly, rotate bulb holder counterclockwise & pull out, replace bulb(# 194). Installation is reverse.....
Check bulbs
To remove the dash from a Jetta, remove the two screws underneath the tray on top of the dash. Pry the dash out slightly, enough to get your fingers behind it, and lift upwards and it will unlatch.
I did it, it's a piece of cake. All you need is a Phillips screwdriver and the new bulb. Kneel down by the license plate and look up towards the top of the plate, you will see 2 screws, remove them. Take out the old bulb and replace it with the new one. Screw the cover back on and your ready to roll.
Because this bulb is mounted vertically, it can be tricky. The recommended method is to remove the license plate and open the trunk lid.
The 2003 Volkswagen Jetta has 8 valves.
how to change the timing belt on a 2003 jetta
The license plate lights are not in a separate fuce by it seft. They are the same as your side marker lights. So, check if your side marker lights are working and if they are them is a bad license plate light bulb.