I am not sure for the 32 Samsung, but I used 6m bolts and washers for my 37 in Samsung and the other measurements were 20.00 length and .10 screw point. I believe that these should also work for your TV. If they are to big the next size that I found on the Samsung website were 4m bolts. I hope that this helps, and they hardware that I bought for my tv cost less than $5 at Lowes.
10-32 unf-2a <<>> The wire size does not need to be calculated. Use a wire terminal end that crimps to the wire. These terminal end come in various wire sizes and bolt hole sizes. Pick the correct end for the wire size you are using and then in that wire size range, pick the correct bolt hole size that fits the bolt.
32 mm
A 10mm wrench, or if you don't have metric wrenches, a 13/32 wrench.
A 7/32 socket or wrench will fit on a 5.5mm bolt, but poorly. You risk rounding off the head of the bolt if it's stuck very tight.
Samsung provides televisions, other than 50 inch, in the sizes 32, 40 and 46 inches. These televisions are the same brand and style just smaller in size than the 50 inch.
There are many places where one can purchase a 32 inch LDC Samsung TV. One can purchase a 32 inch LDC Samsung TV at popular retail stores such as Walmart and Best Buy.
You need one that will cover your 32 inch door with an overlap of several inches on each side.
What size steel I beam do I need to span a 32 feet garage with a floored storage above and no posts
A Samsung 32 inch TV can be purchased at stores such as BestBuy, Sears, and the Samsung website. The best prices for Samsung TV's are at Ebay and Overstock website. They sell for under 300 dollars including shipping.
Bolt size depends on how much load the bolt is to see in operation. The bolt size is chosen to be torqued, or pre-loaded, to a value that exceeds the expected maximum operational (or non opertaional survival ) load. Th epre-loaded value shou dnot exceed 50% of th bolt's ultimate strength. For example say the bolt load in operation is calculated to be 600 pounds. You can choose a 10-32 staeel bolt rated at 1600 pounds strenght and preload it to 800 pounds by torque wrench. You need to convert torque ooald with standard formulas.
Waist is 88 cm, so about 98 cm
Your meaning is not clear. - If you are going to tap the threads in, use a 7/32 drill bit. If you want a hole that this bolt will slip through, use a 9/32 drill bit.