If your truck is equipped with 9 inch brake drums, you need 9 inch brake shoes. Many Dakotas were equipped with 10 inch drums and shoes though, so be certain which size yours is. The size measured is the inside friction surface diameter of the drum.
You have to measure them.
9 mm by 1.25
measure inside diameter of brake drum (where brake shoes touch drum) and measure outside diameter of brake rotors. usually if you look at wheel side of drums and rotors the size is stamped in millimeters on each
It takes a 7mm Allen key.
Other than measuring it, any Auto Parts store has this information. The maximum wear diameter of the drum is cast onto the outside of the drum.
Yes, depending on engine SIZE. (;
if its the same size motor it will.
JAK UP TRUK/USE JAK STANDS, REMOVE ONE WHEEL AND THEN TAKE DRUM OFF WITH A RUBBER MALLET, THEN MEASURE THE BACK SIDE OF THE DRUM, THE PART THAT WAS OVER THE BRAKE SHOES
The tire size on my 2003 Dodge Dakota 4x4 Quad cab is p265/70/16 The tire size on my 2003 Dodge Dakota 4x4 Quad cab is p265/70/16 The tire size on my 2003 Dodge Dakota 4x4 Quad cab is p265/70/16 The tire size on my 2003 Dodge Dakota 4x4 Quad cab is p265/70/16 The tire size on my 2003 Dodge Dakota 4x4 Quad cab is p265/70/16 The tire size on my 2003 Dodge Dakota 4x4 Quad cab is p265/70/16 The tire size on my 2003 Dodge Dakota 4x4 Quad cab is p265/70/16 The tire size on my 2003 Dodge Dakota 4x4 Quad cab is p265/70/16 The tire size on my 2003 Dodge Dakota 4x4 Quad cab is p265/70/16 The tire size on my 2003 Dodge Dakota 4x4 Quad cab is p265/70/16 The tire size on my 2003 Dodge Dakota 4x4 Quad cab is p265/70/16
Measure size of drum from side to side inside where shoe sits. Give measurement to parts guy should jive up. Most models use either a 9 inch or 10 inch drum inside diameter.
You can't. The size stamped into the drum, if it can still be read, will be covered by the wheel. The only alternative if the wheel is not to be removed, is to get under the vehicle and measure from the inside edge of the drum to the opposite inside edge. Most, incidentally, are 10 inches inside diameter, which will have an outside diameter of around 11 inches. The parts person will want to know the inside diameter.
6.5''