9 mm by 1.25
7mm.
Hub Knuckle
Remove wheel Re-install 2 lug bolts to hold rotor in place Remove flexible brake line Remove caliper mounting bolts Slide caliper off rotor
Remove the wheel, locate the Caliper. On the inner side there are 2 bolts going through the caliper, remove those (before removing use a flat head screwdriver to compress the caliper some) remove caliper. If you are removing the rotors remove the 2 large bolts on the caliper bracket.
7 mm
REMOVE WHEEL REMOVE CALIPER BY REMOVING THE TWO ALLAN HEAD BOLTS ATTACHING THE CALIPER TO THE MOUNT, FOUND AT REARR OF CALIPER PULL ROTOR OFF, THE ROTOR IS NOT HELD BY ANYTHING OTHER THAN THE BRAKE CALIPER AND THE WHEEL LUGS. REVERSE TO REINSTAL.
How do I get to the flywheel bolts on a 98 dodge dakota to remove a transmission
Remove the two bolts and use a screwdriver against the hub and caliper.
It is a mixture of both.
I believe that caliper is held with 10mm bolts. Remove caliper, then caliper mounting frame, then rotor will come off.
two bolts in the steering knuckle and the brake line are all that attach to the brake caliper
The starter bolts on a 1998 Dodge Dakota require a 5/8 inch socket or wrench.