The 2006 Kia door panel is held in place with eight retaining clips and two retaining bolts. Pry outward on the retaining clips and remove the retaining bolts.
The 2006 VW Jetta engine shroud is held in place by several retaining bolts. You will need to remove the retaining bolts.
Front caliper bolts 25 ft/lb Mounting bracket bolts 80ft/lb
The 2006 Honda CBF 250 seat is held in place by four retaining bolts. Remove the retaining bolts to remove the seat.
The Volvo 1800 dashboard is held in place with for retaining bolts and 12 retaining clips. Remove the retaining bolts and pry outward on each retaining clip.
18mm
The mirror cover can be removed by removing the mirror cover retaining bolts. You can access the retaining bolts by removing the inside door panel.
I believe it is a 7mm hex.
54 ft lb
Front or rear? Front should have 2 17mm hex head bolts loosen them and remove them both and you should be able to remove the caliper. Rear calipers should have 2 14 or 15mm hex head bolts and just do the same
9MM. Very hard to find. Snap-On tools has it. Maybe Sears. Some Auto-parts stores will carry 9MM as a part of a large set of Metric hex bits; you will rarely find anyone selling them as a single hex bit.
Take the bolts of the fan blades