The 2006 Kia door panel is held in place with eight retaining clips and two retaining bolts. Pry outward on the retaining clips and remove the retaining bolts.
To remove a rear door panel on a 2006 kia sodona you need to take it to a professional mechanic to have it removed.
With a crowbar.
Using a screw driver, remove the screws and remove the clips from the door panel. Remove the panel slowly, remove any wire connections, and pull the panel off the door frame.
You will need to remove the screws in the door. They are located in the door handle, the door latch and at the very bottom of the panel. Once you remove the three screws pull the panel and it will pop out.
Use a screwdriver, and remove the screws and clips in the door panel. Pull the panel out slowly from the frame, and remove the wire connections, and the panel will fall free.
To remove a radio from a 2006 Kia Rio, you need to disconnect the negative battery terminal. Next, remove the upper panel and the mounting screws.
Using a screwdriver, remove the screws and the clips in the door panel, then slowly pull the panel off the frame. Remove the wiring connections, and the panel will come free.
The 2003 Kia front passenger door panel is held in place with two retaining bolts and 10 retaining clips. Remove the retaining bolts and pry outward on each retaining clip.
To open a stuck door on a 2000 Kia Sephia, remove the door panel and check the latch mechanism. It is likely to be bent. Better to replace the latch mechanism.
From reading some other posts in another chain , "you push the panel in and remove the clip on the crank..
First, use a screwdriver and remove the screws, and remove the clips. Next, gently pull the panel, and remove any wiring connectors, then pull the panel off the rest of the way.
The 2003 Kia drivers side door panel is held in place with two retaining clips and 10 retaining clips. Pry outward on each retaining clip and remove the retaining bolts.