3/8" Allen wrench
9 MM
3/8 or 10mm depending on how rusty it is...
I believe that would be a 7mm Allen key.
19 mm front 14 rears and 45 for hex key
I used a 55 torx key and removed one of the bolts but stripped the other. DOn't use a Torx. It is a 10 hex(metric)
You will need a hex key to remove the brake caliper on an '05 Navigator. There will be two bolts that need to be taken off with the hex key.
A 1995 Beretta front brake caliper is not held on by a Torx bolt. Use a 3/8" Hex key.
Front caliper: 9mm hex socket (special), Rear: T-45 Torx.
My 2003 Cavalier uses a 3/8 hex key. It probably should be the same.
18 mm standard thread.
You need a 3/8" allan key or hex socket - not a torx
No, the hex key for fitting it is part of the saw.