always get the biggest that you can afford. stick with a name brand and don't forget to buy a water separator. spending $500.-$800 will get you there
Remove acc. belt. Remove bolt from center of bal. with a heavy duty air impact wrench. Pull off old balancer { you will not need a bal. puller on a 90 3800}. Put new one on, be sure to get the key way lined up and tighten bolt with air impact wrench and replace belt.
In a gear driven compressor which is integral to the engine (as is the case with heavy duty trucks), you don't - the motor oil flows through the compressor, lubricating it. That's why it's also a telltale sign that the compressor is bad if you bleed the air tanks and have oil coming out.
The special sockets that should be used with an air impact wrench is a socket that has been designed with a spring steel that will act as a torsion spring. A special socket is needed in order to take advantage of the impact's wrench inability to work against a spring. ANS 2 The sockets used for impact duty (called "impact sockets") are made with thicker walls and tempered to a lower hardness so as not to shatter under the impacts of the impact tool.
Receip or Piston type compressor are used for large duty cycle work (A/c or other equipments), energy hungry but last longer (Heavy Duty). Where as rotary compressor are energy efficient with higher ( Energy Efficiency Ratio) but lower duty cycle and shorter life. Selection of compressor are based on the nature of application. Normally, for room A/Cs with capacity less than 3 ton, most companies offer rotary compressor due to it's EER and less duty cycle. For heavy duty A/Cs, recip or piston compressor best suited.
I would not use this on a Heavy duty type of spring. This has a tendency to slip off the spring and does not have a long range of travel.
There are three nuts holding the strut to the body. Get access by removing panels under the dashboard. Getting a wrench or a socket to get to the nuts is a challenge. The wheel needs to come out, and a brake line needs to be disconnected. Replacing the strut itself requires a heavy duty spring compressor.
The one I own is light duty. The one I drive for work is heavy duty.
Janome 11558 Heavy-duty Sewing Machine has some heavy duty needles.
Freightliner, Kensworth, Peterbilt and Sterling sell heavy duty trucks. Chevy Silverado and Dodge Ram are heavy duty pick-ups. A new heavy duty truck can cost up to $150,000.
what education do I need to become a heavy duty mechanic
Heavy Duty - Xtatik album - was created in 1997.
Heavy duty.