The size of your filter limits the size of the pump, a 1 hp sta rite dura glas is great pump a 1hp should do you . If you have solar 1 1/2 hp is needed to push the water up on the roof.
In simplest terms, an above ground pool pump is a flooded suction pump, which means the water level must be higher than the pump for it to operate, and an inground pump has the ability to draw water up from a level lower than the pump. The engineering and structure of these two different types of pumps is what makes them work the way they do. This means that, in a typical installation, you could use an inground-specific pump on an above ground pool, but not an above ground pump on an inground pool with the water level below the pump.
I have a 28,000 gallon pool and my pump is 1hp. Works fine.
Generally...no. In simplest terms, an above ground pool pump is a flooded suction pump, which means the water level must be higher than the pump for it to operate, and an inground pump has the ability to draw water up from a level lower than the pump. The engineering and structure of these two different types of pumps is what makes them work the way they do. This means that, in a typical installation, you could use an inground-specific pump on an above ground pool, but not an above ground pump on an inground pool with the water level below the pump.
one and a half horsepower.
In simplest terms, an above ground pool pump is a flooded suction pump, which means the water level must be higher than the pump for it to operate, and an inground pump has the ability to draw water up from a level lower than the pump. The engineering and structure of these two different types of pumps is what makes them work the way they do. This means that, in a typical installation, you could use an inground-specific pump on an above ground pool, but not an above ground pump on an inground pool with the water level below the pump.
Between a 500-gallon-per-minute pump and a 2,000-gallon-per-minute pump.
the best pump is a sta-rite dura glas .. a 1hp is what i would use
You can probably find the plumbing to step down to the right size but the pool pump will have more water flow then a garden hose can safely handle. Your going to ruin either the pump or yourself.
Buy a sump pump from a tool store like harbor freight or northern etc. The one I bought cost 59$ and hooks to garden hose. it pumps 960 gallons per hour. If there is a lot of debris, I suggest the dirty water pump.
A heat pump can be quit noisy. Possibly some of the newest ones are quieter. Almost all new pumps now are fairly quiet. Some are even called whisper-flo.
To winterize your inground swimming pool, first backwash the filter, and then disconnect the pump. Purchase winterizing chemicals for the pool water, and be sure to use a pool cover.
It would be recommended to observe the pump size rating (horsepower) and replace with a swimming pool pump that has a similar flow curve. In terms of brand name, there is no reason that you need to use the existing brand again unless you want to.