0
Ranch King is a brand name of the manufacturer MTD.
Product manuals with part blow-up diagrams are available from MTD's web site,
http://www.mtdproducts.com/
Models are identified from the model number printed on a label under the mower seat.
Parts can be ordered directly from MTD or other distributors on the web.
It is my experience that original brand name MTD belts work best.
The 22HP, 46" mower deck Ranch King Pro has 3 belts:
The drive belt which runs from the engine pulley back to the hydro drive unit to provide over-the-ground propulsion is part #754-0349.
A mower has either an electric PTO or a manual PTO, not both.
The electric PTO belt the provides power to the blade deck (runs around the electric clutch on the engine shaft (activated by electric switch, not the mechanical hand lever that engages the mower deck) is p/n 754-0476 for the 46" deck.
The manual PTO belt the provides power to the blade deck (runs off the pulley on the engine shaft (activated the mechanical hand lever to the left of the steering wheel that engages the mower deck) is p/n 754-0228 for the 46" deck.
The deck belt that goes around the 3 blade spindle assemblies on the mower deck, to drive the grass cutting blades is p/n 754-0349
In my experience, the PTO belt lasts about half a season, the other belts break about every other season when mowing 4 acres weekly.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What size belt fits a ranch king mower that has a 42 inch deck?
the drive belt is 76 length 1.5 width
What size of belt fits a ranch king mower that has a 38 inch deck?
5L74 gates
How do you replace a belt on ranch king pro model 310777 16.5 hp 42 inch cut?
You can replace the belt, on your Ranch King lawnmower by loosening the tensioner pulley. Loosening the tensioner pulley will create slack in the belt.
What length is Craftsman snowblowerC950-52408-4 auger belt 581264?
belt 581264 is an a33 or 4l 35 it is a 1/2 inch wide by 35 inch long v-belt
What is the drive belt size for a john deere lx172?
The John Deere LX172 38 inch blade deck uses a 65 by 1/2 inch V belt. If you ask for a 65 inch belt at an auto parts or hardware store, there is no need for a multi-numeral part number.
What is the spark plug gap for 57 ford 6-cylinder ranch wagon?
fordparts.com shows two listings ( .030 inch and .035 inch )
What is the deck belt size for a Murray 16hp 46inch cut take?
The 66 inch deck belt fits Murray 42 inch and 46 inch models 425303X92A, 425303X92B, 465305X92A, 465305X92B. The width is 11/16 inches. This belt size replaces Murray part numbers 37X112, 37X112MA.
When do you change the serpentine belt on a 2002 Chevrolet Malibu?
The belt is bad if it has 3 cracks per square inch.
Do you have a belt diagram for mtd yardman riding mower?
how do you rout a belt for 42 inch master cut 13aj7955059
Belt squealing when is humid?
Its the alternator drive belt slipping and it needs to be adjusted. A vee belt should have about 1/2 inch of in and out movement halfway (about an inch or 25mm of free play) along the longest length between pulleys. A flat belt should be adjusted according to the manufacturers specification.
What size blade belt for a 40 inch deck 12.5 engine Murray rideing mower?
84 inch
What is the most common belt sander?
The 18 inch Black and Decker.
