You will need a 14 mm
oil
That requires a special socket made just for oil sending units. Your local auto parts store can sell you one.
It is a special oil pressure sender socket. It is very similar to a 1 1/16 deep well
Use water pump pliers, they fit almost all oil filters.
you will need a 14mm socket for the drain plug & a special oil fliter cup socket for the oil fliter. the oil filter cup socket is available from most auto parts stores or your local Toyta dealership.
15mm six point socket or 15mm wrench
Use a 3/8 ratchet and the correct size socket on the drain plug.
Its a 28mm socket.
32 mm socket!
use a 1 and 1/4 inch socket to remove oil filter cap.
Its under the hood you need a 24 mm socket