That depends on the engine. I believe that the 2.4L needs a 10mm socket, the 3.0L uses a 12mm, and the 3.3L/3.8L use a 13mm socket to remove the housing bolts.
Follow the upper radiator hose to where it meets the engine. Remove the two bolts of the thermostat housing and remove and replace the thermostat.
where is the thermostat on a 94 dodge caraven
The thermostat on a 1999 Dodge Caravan is under the housing where the upper radiator hose attaches to the engine.
thermostat
1 1/4 inch
The big nut on the end of the axle shaft is 1 1/4 in
The thermostat housing is held down by two bolts. Remove the bolts, remove the old thermostat. Install new thermostat with a new gasket. Reinstall housing. Fill coolant. Warm engine up, and recheck coolant level.
No.
You unbolt the housing that the upper radiator hose hooks to. Remove it and remove the thermostat underneath. Clean off any old gasket, install new thermostat and gasket. Install housing. Fill coolant, warm engine and check for leaks.
No, you will not have to drain all the coolant to change the thermostat on a 1999 Dodge Grand Caravan. Only the hose that is connected to the thermostat needs to be drained.
how to remove lighter socket from 2013 dodge durango console
1.2 hrs.