10mm
You will need a 5/8 socket.
You'll need a 5/8" socket.
they are at the top of the cylinder head and just use a socket or wrench to remove it
32mm Hex
Any type of socket can be used to remove a 91' Cavalier wheel cylinder bolt that looks like a reversed torx. However, make sure the socket is a bolt head socket.
Lift the car, buy a socket set, and remove the oil filter..
It takes a 12 point 12 mm socket
with a wrench or socket
The engine block coolant plug on a 6-cylinder is near the bottom of the engine. You will need to use a socket set and ratchet to remove the plug.
on my 2002 alero I havw the 2.2 4cylinder ecotec engine, on the intake there is a cover that says 2.2, remove the four bolts and the plugs are down in the little cylinder holes mine require a 5/8 spark plug socket and you will also need an extension.
No, you do need a long socket extension that will not release the sparkplug socket deep within the cylinder head. Mine releases with a button at the top of the extension. I'm not sure what the technical name for the tool is.
Surely you have more than one socket. Keep trying different sizes until you find the correct one.