0
What size socket is needed to remove spark plug on a 97 Hyundai accent?
Wiki User
∙ 12y ago
You'll need a 5/8" socket.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What size socket is needed to remove spark plug on a 2002 Hyundai Accent?
You will need a 5/8 socket.
Where is the ecu on a 2002 Hyundai accent?
where is the ecu for a 2002 Hyundai Accent?: this computer is located under the dash, left side. can't miss it, just look under the dash. bolted in with 6mm bolts, use 10mm socket to remove. Make sure you disconnect battery first if you decide to remove it or replace it.!
How do you remove the back seat of a 1996 Hyundai accent?
for Hyundai accent gsi (yr 2000) needed: 12mm short socket ratchet remove spare tire cover. Fold down rear seats. Remove the bolt holding each seat separately onto hinge. remove these two pieces. Remove the two bolts from each side from the rear of bottom seat section. From the front of the rear seat there are two buttons-levers-mini handles.. push those towards the rear of the car and pull up on seat cushion.
How to remove an oxygen sensor from the exhaust manifold on a 2001 accent?
by unplugging the sensor from the contact and using a slotted socket to remove it. This socket usually is bought separate from a set.
What size Allen socket is needed to remove caliper bolt on a 2004 Escape?
What size Allen socket is needed to remove bolt from caliper on 2004 ford escape
What size socket do you require to remove cylinder head bolts on a Hyundai coupe v6?
10mm
What size socket do you need to remove the axle nut from a 2003 Hyundai sonata?
32mm Hex
What size wrench do you use on the oil drain plug on a 2006 Hyundai Accent?
If the drain plug is original equipment, it takes a 17mm wrench or socket.
How do you replace an alternator on a 2001 Hyundai Tiburon?
Lift the car, buy a socket set, and remove the oil filter..
What size Allen socket needed to remove brake calipers?
9mm
What socket size is needed to remove the front hub nut from a Peugeot 306?
You will need a 35 mm socket.
What size Allen socket is needed to remove cabliper on 2006 mustang?
9MM
