Want this question answered?
You will need a 5/8 socket to remove the plugs from your 750 Honda motorcycle. A deep well socket is recommended.
The two side plugs can be removed with a regular rachet and socket and the ones at the top of each head will need to be removed with a special tool because a rachet and socket will not fit in right because of the angle. It is the long silver tool laying horizontally in the middle of the set.
Same as anyother spark plug, 5/8 i think
2
Remove the chrome cover, pull out the plug cable, use the spark plug socket with a ratchet.
Replacing the plugs is fairly easy. Just remove the plastic engine cover then unbolt and remove the 4 coils. Once removed you need to look down and you will see the plugs that need to be removed with a spark plug socket.
Remove the spark plugs wire and remove the plugs wit a spaerk plug wrench or socket.
You can remove the 2001 Acura spark plugs with a 5/8 deep well socket. Turn the socket to the left to remove the spark plugs. Reverse the process to install the new spark plugs.
Remove the spark plugs with a 5/8 deep well socket. Turn the socket to the left. Tighten the new spark plugs by turning socket to the right.
You can remove the drain plugs, on your VTX 1300, by loosening the plugs with a 5/8 five sided socket. Turn the plugs to the left to remove them.
with a socket wrench
If you call your local Honda dealership they can tell you right away