answersLogoWhite
Motorcycle and ATV Maintenance
Honda Motorcycles

What size socket to remove plugs from 750 Honda ace motorcycle?

012

Top Answer
User Avatar
Wiki User
Answered
2014-06-25 18:13:42
2014-06-25 18:13:42

You will need a 5/8 socket to remove the plugs from your 750 Honda motorcycle. A deep well socket is recommended.

001
๐Ÿฆƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


Remove the chrome cover, pull out the plug cable, use the spark plug socket with a ratchet.


Remove the spark plugs wire and remove the plugs wit a spaerk plug wrench or socket.


You can remove the 2001 Acura spark plugs with a 5/8 deep well socket. Turn the socket to the left to remove the spark plugs. Reverse the process to install the new spark plugs.


Remove the spark plugs with a 5/8 deep well socket. Turn the socket to the left. Tighten the new spark plugs by turning socket to the right.


You can remove the drain plugs, on your VTX 1300, by loosening the plugs with a 5/8 five sided socket. Turn the plugs to the left to remove them.


Replacing the plugs is fairly easy. Just remove the plastic engine cover then unbolt and remove the 4 coils. Once removed you need to look down and you will see the plugs that need to be removed with a spark plug socket.


they are at the top of the cylinder head and just use a socket or wrench to remove it


Remove the spark plug wires from your 2000 Chevy Impala spark plugs. Remove the spark plugs with a 5/8 deep well socket by turning the socket to the left. Reverse the process to install the new spark plugs.


Remove the spark plug wires from your 1993 Chevy Astro spark plugs. Remove the spark plugs with a 5/8 deep well socket, by turning the socket to the left. Reverse the process to install the new spark plugs.


Remove the spark plug wires from your 2004 Chevy Malibu spark plugs. Remove the old spark plugs with a 5/8 deep well socket, by turning the socket to the left. Reverse the process to install the new spark plugs.


Remove old spark plugs. Insert new spark plugs..... Simples


Get the front fairing loose, remove the radiator, remove the gas tank COVER. Removeing the tank cover will aid greatly in installing the plugs via a hole in the frame directly above the end plugs. You won't be able to reach the center two plugs without removing the radiator. Once you remove the radiator be careful with it. The radiator alone is $750.00


The 2006 Toyota Tacoma V-6 engine spark plugs can be removed with a 5/8 deep well socket. Turn the socket to the left to remove the spark plugs.


You will need to remove the spark plug wires on your Chevrolet 3.1 liter engine. Remove the spark plugs with a 5/8 deep well socket. Turn the socket to the left. The spark plugs will come out. Reverse the process to install the new spark plugs.


No, just remove the coil, and use a spark plug socket.


The two side plugs can be removed with a regular rachet and socket and the ones at the top of each head will need to be removed with a special tool because a rachet and socket will not fit in right because of the angle. It is the long silver tool laying horizontally in the middle of the set.


Remove the spark plug wires from your 1997 Chevy Express 5.7 liter engine spark plugs. Remove the spark plugs with a 5/8 deep well socket, by turning the socket to the left. Reverse the process to install the new spark plugs.


remove the high voltage wires that connect to the top of the plug. take a spark plug socket, or a regular socket if you don't care and take out the plugs


Remove the spark plug wire caps from the spark plugs. Remove the spark plugs by turning them to the left with a 5/8 deep well socket.


remove the spark plug wires one at a time and unscrew the plugs


on th etop of the motor remove the plastic cover. it will give you access to the coils and plugs. Using a 10mm socket, remove the engine cover. All 4 plugs are in the center of the block. Two are really easy to find, the other two need to be removed after you remove the cover on top. You will need a 10mm socket to gain access to them. Don't forget your extender when changing the plugs.


spark plugs are located in the side of the head you remove them with a spark plug socket tip for you if you dont know where spark plugs are or how to remove them, i would get someone that does know, to do it or at least show you


You can remove the spark plugs in your 2003 Mitsubishi Eclipse by turning the spark plugs to the left. You should use a 5/8 deep well socket. The spark plugs will come out.


Remove the engine covers and carefully remove the ignition wires from the spark plugs, there are 12 of them, then remove the spark plugs with a 5/8 plug socket. Make sure the gap is correct on new plugs put a bit of anti seize on the threads then install the new plugs...


Remove the spark plug wires from the spark plugs, use an extension for your Allen wrench, and use a spark plug socket to remove the spark plug.



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.