Want this question answered?
15 mm socket and ratchet for the caliper to bracket. if not it is a 13 mm socket and ratchet. the bracket to spindle is 18mm socket and ratchet
A 3/8 inch Allen key is used.
A 11/16 socket is needed to remove the 1984 Chevrolet pickup front axle hub assembly. The socket should be a five-point socket.
A 3/8" Allen socket or wrench will work.
Lug nuts to remove wheels 3/4" socket, bolts to remove the calipers 18mm, then pull rotor off.
It takes a T55 Torx bit on the front calipers.
I just finished a brake job on a 1997 cavalier z24. It took 20 minutes per axel. To remove the calipers use a 3/8" hex. Not a 3/8" socket but a 3/8" hex stud type socket available at most auto parts stores.
Remove the calipers and the disk will pull right off
If your asking about what size wrench is needed to remove the bolt that holds the front brake calipers on a 93 Chevy pick up, it would be a 3/8" allen wrench.
3/8"
Remove the socket from the rear of the fixture, remove faulty bulb from socket and replace with good bulb and replace socket in fixture. Fini!
I think that is a 1 and 1/4 socket.