12
there is 19mm socket
22mm socket. Good luck!
Socket 754 is primarily designed for computer microprocessors with operating frequencies ranging from 2.4Ghz for desktops and 2.6Ghz for laptop computers. They were introduced in 2003.
Older X86 Architecture that was primarily used as a replacement for Socket 5. Commonly used for the Intel P5 Pentium processors. Also used for AMD K5 and K6 processors. Supported speeds from as low a 70mhz to 233mhz.
i used a 27/32
A cable tray is a support mechanism for electrical wiring. Primarily used in commercial applications, they hold the many wires that provide electricity to a building or large room.
it would be a 19mm or a 22mm
A Hod is a tray or trough device with a pole handle used to tote heavy loads on the shoulder. They are used primarily by masons or masons' helpers to carry bricks/stones and mortar.
Unsure exactly what it is that is being asked about. The part number of the switch, or the size of the socket used to install it. Whatever. . . it will be in millimeters, there are no SAE parts on the vehicle
14mm socket is used for main mounting bolts, there are two. The caliper alignment pins use 12mm
sieve tray
Just try different sizes until you find the correct size.