14mm socket is used for main mounting bolts, there are two. The caliper alignment pins use 12mm
What size Allen socket is needed to remove bolt from caliper on 2004 ford escape
caliper bolt size 2007 Honda odysey
9mm hex
9mm Hexbit Allen Socket. Hard to find. Sears usually carries, you can order online
I have a 2003 Escape and it took a 7 mm socket.
probably 3/8"
3/8ths
7 mm. You can buy this.
what size of socket do i use to loosen caliper retaing bolt on ford f150 truck
_________________________________________Front caliper bracket mounting bolt-148 ft-lb Front caliper guide pin bolt-74 ft-lb
7 mm Allen wrench
in order to remove the rear caliper, you first remove the parking brake cable using a 14mm socket to remove the bolt. After removing the parking brake you can remove the caliper carrier, using a 17mm socket to remove the two caliper carrier bols this allows you to remove the caliper from the rear rotor, you can slide the caliper off of the carrier to remove it completely. to remove the rotor you can use a soft faced mallet and gently tap the inside of it and it should come right off.