0
What size socket is required to remove the main nut from the end of your 89 Corsicas driveshafts?
Wiki User
∙ 15y ago
It should be a 36mm socket.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
What size socket should you use to remove the main nut from the end of your 89 Corsicas driveshafts?
Most are 36 mm. Mark
What size socket is required to remove the hub nut on 2006 Honda Accord se?
36mm.
What is the correct size of socket required to remove a 2H nut on a 1¼ stud bolt?
2"
What size and type of tool is required to remove the bolts holding the 1995 ES300 calipers in place?
17 mm wrench or socket
How to Replace lamp socket?
1. Unplug from voltage. 2. Remove lamp. 3 Remove socket from stand. 4. Replace old socket with new socket.
What is the oil filter socket size to remove filter on 2009 Pontiac Vibe?
Also an adjustable wrench works great and can be used on multiple tasks other than changing oil!
What socket type is required for the Intel Core i7-pxx desktop series?
The socket type that is required for the Intel Core i7 9xx desktop series is the LGA1366 socket.
How do you remove serpintene belt on 98 Ford truck?
The tensioner has an arm with a roller at the bottom. Find the size of the socket required to get around the nut at the center of the roller (I believe the last Ford I did this on required a 16mm socket). Turn the ratchet/breaker bar (attached to the socket) counterclockwise. The arm should turn and raise the roller, which will loosen tension on the serpentine belt.
How do you remove the rotor on 1991 Ford F150 4X4?
special socket required to remove nut that retains rotor and wheel bearing. use impact gun . be prepared to repack and reset wheel bearing
Remove lighter socket from 2013 dodge durango console?
how to remove lighter socket from 2013 dodge durango console
How can you remove something that is lodged in your spark plug socket?
remove socket with item stuck get screwdriver push threw and watch out for palm!
How do you remove a wall socket?
# Find the circuit breaker or switch that controls the wall outlet and turn it OFF. # Remove the faceplate. # Remove the upper and lower screws holding the wall socket in place. # Remove the two wires from the back or sides of the socket. Installation is the reverse.
