3/8 inch Allen
FIRST, YOU REMOVE THE TIRES THEN YOU GET EITHER 3/8 OR 10 MILLIMETER HEX SOCKET TO REMOVE THE CALIPER. REMOVE THE BRAKE LINES AND PULL HER OFF. INSTALLATION IS REVERSE
how to remove lighter socket from 2013 dodge durango console
Its not an Allen wrench its a specialty socket. Go to like autozone or a place like that. i got mine at carquest in las Vegas.
That depends on the engine. I believe that the 2.4L needs a 10mm socket, the 3.0L uses a 12mm, and the 3.3L/3.8L use a 13mm socket to remove the housing bolts.
Remove front driver side tire. remove panel in tire well. Battery is in there..
30mm
7mm hex socket
It is a 33mm socket you will me to remove the nut
If you don't have the tool a 13mm socket should work
it is in the fuel tank, you have to remove the tank or the bed of the truck.
Remove the back seat with a number 55T torque screw socket and then you can slide out the back panel to get to the speakers.
Steering knuckle.