0
What size socket wrench do you need to replace 2005 Nissan maxima brake pads?
Wiki User
∙ 10y ago
14 or 17 mm socket.
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
How do you replace spark plugs on a Nissan Maxima 1995?
When replacing spark plugs on a Nissan Maxima 1995 remove the spark plug covers by twisting until they come loose. Use a socket and wrench to turn the spark plug to the left until it is released from the vehicle. Repeat for all spark plugs. Screw the new spark plugs into the vehicle and replace the spark plug covers.
What tools are required to replace rear brake pads on a 96 Nissan Maxima?
socket wrench, vice grips, screw driver. It's easy like a puzzle piece if the rotor is not scarred. The pads clip into place but if you waited too long you'll have to replace the rotor. You can get all the parts and advice from Auto Zone. I've done mine on my 97 Maxima twice.
How do you replace a crankshaft pully on a 96 Nissan maxima v6?
Just did one on a 2000 which is the same thing. You have to use an impact wrench with enough torque to take it out.
On a 2001 Nissan maxima how do you open the rear brake caliper bleeder valve?
with a wrench
What types of tools do I need to have so I can replace the spark plugs in my 1998 Nissan Sentra?
You will need a general screwdriver, a spark plug socket, a socket wrench and and extender, a wire brush and a silicone dielectric compound. You should find more of these tools at SEARS or your favorite car parts dealer. You will need a spark plug wrench with an extension to replace the spark plugs in a 1998 Nissan Sentra. You can find an instructional video at www.youtube.com.
How can the loose wire of a starter on a 97 Nissan Maxima be fixed?
If the wire is loose at a connection, find a wrench that will fit it and tighten it.
How much do you tighten a cv joint nut on a 99 Nissan maxima?
Usually when you replace a CV joint or need to take the nut off that holds it together, you use a torques wrench, you should set it anywhere between 180-190lbs
How do you remove the front rotors on a 95 Nissan PU to replace brake pads?
with a 14mm wrench
How do you remove 1993 Nissan Maxima rear speakers?
To remove a 1993 Nissan maxima rear speakers you will have to remove the seat back, you will need a wrench to remove both of the bolts on each side. The seat will move once done, and then pop the parcel shelf trim. The speakers should come out.
Do I need special tools to replace my spark plugs?
To replace spark plugs, you can use a socket wrench, but a socket made for removing and replacing spark plugs is needed. This socket is relatively inexpensive and can be found at most auto parts stores.
Can I use a metric socket on a standard socket wrench?
No, you cannot use a metrc socket on a standard socket wrench. These are two different systems of measurement and are not interchangeable.
What tools needed to replace brake pad on a Toyota tercel?
To replace the brake pads on a Toyota Tercel a jack is needed. Some other tools that will be used are a socket wrench, screwdriver, lug wrench, and a pair of pliers.
