If the table height is 29 inches standard then 120 inches is perfect fit, which gives the drop up to the floor.
If the table height is standard 29 inches, if you want the drop up to the ground, you require 132 inch round tablecloth and if you want the drop half the way (i.e 15 inches) then 102 inch round tablecloth is perfect fit.
If the table height is 29 inches standard then 90 x 132 inches is perfect fit which gives the drop up to the floor.
Just a sleeve to reduce the size of a pipe. You can get one to reduce a 4 inch down to a 2 inch or whatever you need to do.
T6 is a size of Torx wrench, not a hex key size. If you need to fasten or unfasten a T6 size fastener, you should obtain the appropriate tool to do so.
There is no single size that a cafeteria table should be. It depends on the space available in the room and how many people there are to be fitted around the table.
Table linen size will depend on the drop you need. For a 5 foot diameter (60 inch) ROUND table and using a 90 inch ROUND tablecloth your drop would be 15 inches all around the table. For a 5 foot diameter (60 inch) SQUARE table and using a 85 inch SQUARE tablecloth your drop would be 12 and a half inches all around.
Probably an 84 square inch tablecloth. It depends on the shape and size of your table.
If the table is 42 inches in diameter and the height is 29 inches then 102 inch tablecloth is perfect fit which gives drop to the ground.
No it will not fit. It will sit on the table like a large, odd-looking place mat. Tablecloth measurements refer to the exact size of the table cloth, not to the size of table it will fit. For a 96 inch diameter round table, you'll likely need a 120 inch diameter tablecloth to allow for 12 inch overhang all the way around. You can use a 108 inch round, which will give you a 6 inch drop or 120 inch round, which will give you a 12 inch drop or 128 inch round, which will give you a 16 inch drop
learn math
That completely depends on the height of table top above the floor. The width of the tablecloth needs to be the width of the table (60") plus twice the height from the floor. So, if the height from the floor is 30", the tablecloth needs to be 120" wide.
If the table height is standard 29 inches, if you want the drop up to the ground, you require 132 inch round tablecloth and if you want the drop half the way (i.e 15 inches) then 102 inch round tablecloth is perfect fit.
72 inches
A 4 x 8 tablecloth would be suitable.
If the table height is 29 inches then 132 inches tablecloth perfect fit and it will give drop up to the ground.
If you are making a rectangular 9 ft. tablecloth, you will probably need a little more than 9 ft. of fabric to allow for turning under and finishing your two ends. I would suggest 3 yards (9 ft.) plus another 6 in. to allow for turning under 1" and finishing your two ends with 2" hems.
Depends on the height of the table !