0
The 2011 Honda CRV wiper blade sizes are 26" drivers side, 17" passenger side and a special 14" rear wiper that is difficult to find in the stores. See sources and related links below for more information. Since there are currently over 22 different wiper arm attachments, do not buy wipers just by length only - be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
How do you replace a rear wiper arm on a Pilot 2009?
People get terminology mixed up quite a bit so we have to clarify. Do you mean wiper arm or wiper blade? Wiper arm is attached to the spindle near the hood and is rarely removed or replaced. Wiper blade is the wiper frame assembly and rubber blade that is connected to the wiper arm and is changed very regularly. If you just mean the wiper blade (frame and assembly), then you need to get the correct wiper blade at the Honda dealer because aftermarket options are not available. They should also give you installation instructions.
How do you change the windshield wiper blades on a 1993 Honda Accord?
The 1993 Honda Accord has the most common hook-end wiper arms. See related link below for installation videos. Lift wiper away from glass. Press button or tab in the area where the wiper blade is inserted into the hook. Pull wiper out of hook. Sometimes you need to rotate and flex the blade to make enough clearance for the hook to pass through.
How do you change the rear wiper on a Honda Pilot?
See souces and related links below for Honda Pilot rear wiper blade installation video and rear wiper blade information. I found a replacement for my 2011 Honda Pilot at Walmart. It is an Anco AR-14B. It looks identical to the original and fits perfectly. It is, however, missing the "foot" that rests in the holder. Though this has not affected the performance. The blade attaches to the arm with a single axel, for lack of a better term. You must pull arm away from the window and rotate the drivers side of the blade back toward the window. The axel slides out at an angle, back toward you and to the right. It takes a little force, but use care so you don't break the plastic arm. (Really Honda? A plastic arm?) Install the new wiper in the reverse order. You will need to push the arm through the blade to get the blade positioned properly, then slide it on. Listen for the snap and your are done! Good luck!
What size wiper blades do you need for 2007 to 2011 Honda CR-V?
The 2007-2011 Honda CRV wiper blade sizes are 26" drivers side, 17" passenger side and a special 14" rear wiper that is difficult to find in the stores. See sources and related links below for more information. Since there are currently over 22 different wiper arm attachments, do not buy wipers just by length only - be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment. NOTE: It appears this wiper configuration was changed for the 2012 generation of CRV's...don't assume - look the 2012 up.
What wiper blades fit the 2006 Honda civic?
You need to get the wiper blade from the dealership. You can just replace the wiper rubber. It slides into the wiper assembly at a cost of about $5, or replace the whole unit for around $50 each. I replaced the rubber part on mine and it's great.
The driver side wiper blade on your 1998 Honda Accord doesn't move when you turn them on Does it just need a new fuse?
the spindle is stripped out tighten it up
What is the wiper blade size for 1999 Nissan sentra?
You will need a 21" blade for the driver side and a 19" blade for the passenger side.
What size rear wiper blade do you need for a 2001-2009 Mazda tribute?
The 2001-2009 Mazda Tribute takes a 10" or 11" rear wiper blade.
What size wiper blades do you need for 2010 Honda CRV?
The 2010 Honda CRV wiper blade sizes are 26" drivers side, 17" passenger side and a special 14" rear wiper that is difficult to find in the stores. See sources and related links below for more information. Since there are currently over 22 different wiper arm attachments, do not buy wipers just by length only - be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment.
How do you get a wiper blade off a 2002 blazer?
The 2002 Chevrolet Blazer has the most common hook-end wiper arms. See related links below for install video. Locate the tab or button where the wiper blade is inserted into the wiper arm hook. Pull wiper blade out of hook. Sometimes you'll need to rotate and flex the blade to make enough clearance for the hook to pass through.
How you change a wiper blade on suzuki forenza?
That vehicle has hook wiper arms. Find little tab on wiper blade where its inserted into the hook. Press tab and pull wiper out of hook. You may need to rotate blade to make clearance. Sometimes you have to flex the blade a little to in order to make enough room. See video for hook arms on the link below.
How do you change the rear wiper blade on a 2004 Honda Pilot?
First-off, the 2004 Honda Pilot has a special rear arm and you need a wiper with an "B" attachment. You can go to your dealer or I know Trico makes a model 14-B (Exact Fit Rear Integral Blade 14-B). There may be others available too. Application guides are at the store or you can 'lookup wiper size' online to find other options/part numbers. I've got the Trico on my Jeep and it fits/works great.The replacement rear wiper blade will come with step-by-step, illustrated instructions and once you have the instructions and the wiper blade/arm in your hands in front of you, it will all make better sense and will an easy maintenance task.Essentially, you rotate the blade to the side and then snap off the blade. The new blade snaps on in the reverse order. Very simple and takes 2-5 minutes usually not requiring any tools.
