I believe the caliper is held by 14 mm bolts.
There should be 2 screws on the front of the rotor, remove those and the rotor should come right off....you also have to take off the caliper bracket.
The brake rotor specs for 93 Toyota corolla the outside diameter 255 mm and inside diameter is 142.2 mm.
2005 Toyota tacoma how to remove the brake rotor
Thea minimum thickness for a 1996 Toyota Corolla rotor is .787, measured in In thousandths of an inch. Anything rotor that does not meet this minimum thickness should be discarded.
Inside the distributor cap under the rotor.
Yes
no
The reason that the front brakes on a 1995 Toyota Corolla are not releasing is likely due to low brake fluid. It could also be that the rotor is stuck or the pad has frozen into a clamped position.
No it is not. I own the same car and have done over 3 brake jobs. All you have to do is remove the caliper bracket bolts (2) and the caliper slide bolts (2). Get the caliper out of the way by a bungie cord and your ready to remove the rotor..Oh yeah! Most people think it is connected to the hub because the rotor is rusted on to the hub pretty tight...Use a rubber mallot to tap off rotor. Hope that helps out...
You need to remove the wheel, the caliper and the caliper mount. After you do that you can remove the caliper.
Toyota rotor removalonce you remove hub assembly and bearings, inside the rotor the hub should be bolted to the rotor, six bolts. then separate hub/rotor.
It's probably a 32 or 36mm impact socket a wrench probably won't work.