A Champion CJ8Y or J19LM will perform fine
What is the gap on the spark plug on a Brigg's stratton lawn mower Model#31P777 Type 0348E1?
American noodles are yummy, but you sound yummier
One can purchase parts for a used Briggs and Stratton lawn mower from the following sources: Mower Graveyard, eBay, Briggs and Stratton, Zangler Repair, Lowes, Discount Online Parts.
not getting fire 4.75 briggs statton lawn mower
You can set most plugs at .030 and be safe.
Brigg's and stratton 5.5 hp on the craftsman push mower your gap tool set the gap at .025-030 for briggs 5 hp
You can find the operator's manual for that engine at www.briggsandstratton.com. You will need to contact the manufacturer of the mower for the lawn mower owner's manual. Briggs and Stratton did not amke that mower, only the engine.
The Briggs and Stratton part number for a standard spark plug is 496018S. You can either buy this exact plug or call around to local lawn mower shops or auto parts providers (NAPA, O'reilly's...) and get them to cross reference the part number to see what other plugs will work.
It is a 2-cycle 4HP Briggs motor.
Check the underneath of lawn mower for grass built up.
Briggs and Stratton is a select brand of lawn mower. When oiling one's Briggs and Stratton lawn mower engine, it is best to use a high quality oil. One can find such an oil at their local home improvement store, such as Home Depot.
I am asking the question. So there is no point in asking me to answer the question if I do not know the answer.
Put lots of oil in the cylinder through the spark plug hole, and let it sit overnight.
go to briggsandstratton.com
You should always have 20 fluid ounces of oil in a Briggs and Stratton 5.5 HP lawn mower. This equals out to roughly 1.6 quarts.
The way to drain gasoline from a Briggs and Stratton lawn mower is to take the oil cap off and drain the oil. From there, run a rubber hose into the drain and siphon the rest of the oil and gas out.
Briggs and Stratton and Kohler engines are considered quality components. Neither is likely to be better. However, the Briggs and Stratton brand is more popular.
The gap for the plug on all horizontal shafts is .030" and some vertical shafts are .020"
yes B&S labels oil
SAE 10w30 Synthetic.
You could try cleaning the spark plug. That worked for us. Take the spark plug out with a wrench and use sandpaper to clean it.
probably needs a diaphragm
If it is a 3.5 hp I usually use a j-8 or equivalent seems to work well in them. hope this helps
Briggs and stratton engines use different oils depending on the temperature to which the engines will be used. Generally sae30 oil should be used for mower engines
Briggs and Stratton 30W for 4 cycle engines.
Asked By Wiki User
Asked By Wiki User