You may have to shop around to find all thicknesses that are manufactured, but it can be as thin as 1/8", ranging up to two inches thick.
The maximum thickness of a reinforced concrete wall is 203 mm.
At least 10 years At least 10 years
It could be 65" (b wall - 5.5" wall thickness), or 66.5" (c wall - 6.25" wall thickness).
t = PxDxA/2E where, t = thickness P = pressure D = pipe Diameter A = factor of safety E = tensile strength of pipe
A typical load bearing header will be 2 2x12s with a 7/16 plywood spacer between them.
It will depend on the thickness of the plywood!
with a tape measurer
Plywood. It has more trapped air.
I need the thickness dimension of 12 ply plywood for floor.
Generally speaking, the thickness of the plywood layed directly over floor joist.
The easiest way to determine an honest weight of a 4' x 8' sheet of plywood? 20-25 pounds per 1/4" of thickness. 3 pounds per square foot per inch of thickness according to APA Plywood Design Specification.
The cost of plywood depends on your location, dealer, thickness, and type. However, as a rule, an 8 foot by 4 foot piece of plywood will cost around $9 a sheet.
ahhh the all time question are you doing a complete tare off? if so 1/2 osb or 1/2 cdx (cdx is a poor grade plywood osb is orientated stand board or wood chips) osb is most economical as it is cheap and it works
18 mm is a measure of the thickness of the plywood. It gives no information at all on the length or width of the ply, which is what is required to calculate a volume.
That depends on the thickness of the plywood. If it's 3/4 then anywhere from 46 to 52 depending on the manufacture. Generally 48, again different thicknesses have a different count in the unit.
These are some of the commonly available types of plywood in India. It's important to choose the right type of plywood based on the intended application, environmental conditions, and budget constraints. Always ensure that the plywood you purchase adheres to the relevant Indian standards and carries the necessary certifications for quality and safety.
It varies from country to country, and also depends on the thickness of the ply sheet.