0
Check your stabilizer level (or conditioner) it should be 40-60 PPM. Next check your salt level, should be 3000-3600 PPM. If their both in line; make sure your chlorinating cell is clean. If there is algae in your pool you must shock it with regular chlorine. See instructions on label.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
Does saltwater effect gold?
No. Gold resists salt very effectively. a good example is gold that has been found in sunken treasure still being in perfect condition. the concentration of salt in a saltwater pool is very low, about the same as that in your tears or blood.
What happens when you add chlorine to saltwater?
Sea water contains a low concentration of bromide ion which is oxidised to free bromine Br2 by chlorine.
Cloudy pool free chlorine is not reading stabilizer is low but pH is ok?
Add chlorine and stabilizer.
Is it true that converting an older concrete pool to saltwater can be a problem?
It makes no difference how old the concrete pool is, or whether piping is copper. Better not to have a very old stainless steel filter or metal pump. The very low salinity used with latest saline systems is generally not corrosive.
What does the code 93 mean on the intex salt water pool system?
It means you have a water flow issues. The inlet that water flows out of the pool to the pump might be clogged. Remove the blue piece that is attached to the wall. A lot of time that is clogged. Check to see if the filter is clean.
Is the saltwater crocodile endangered?
No, listed as low risk or least concern by the IUCN.
What if your total chlorine is high and your free chlorine is low?
You need to shock the pool. The difference between Total Chlorine and Free Chlorine is tied up and it will be cleared by shocking. Thatis the purpose of shocking.
Do you recommend saltwater filters for fiberglass pools?
Yes the low concentration of salt in a salt water pool would not ham fiberglass any more then much stronger concentrations of salt in sea water water harms the hull of a fiberglass boat.
Your saltwater system for your pool continually reads add salt you have added over 300 lbs and it still has a very low chlorine reading and still claims to need salt Any suggestions?
What are your salt readings? They need to be in the right parameters to function properly. Re read the instruction manual for the salt system. Are you using pool salt? How big is the pool? Read the label on salt for instructions as to quantity to add.
How much stabilizer do you add in a 30000 liter saltwater pool when the test strip color shows too low?
Not sure what too low means, But you need in an outdoor pool about 80 PPM of Stabelizer and in an indoor pool around 10 to 20 PPM. We have a new product called pool magic which each gallon adds 20PPM stabelizer per Regular cyanuric acid has a low pH and is very acidic and it can take 4 to 7 days to dissolve. This can cause damage to the pool surface or circulation system depending on the method of application. Until dissolved, dry cyanuric acid will not protect chlorine from UV loss. Natural Chemistry�s Instant Pool Water Conditioner is not an acid (it�s a salt) and has a pool friendly pH of about 8.0. Add it to the pool and an instant later it is in solution and ready to protect your chlorine.
What causes low alkalinity?
Improperly sanitized water or excessive rainfall can cause a low total alkalinity level in your pool. Low total alkalinity can cause pool staining, itchy and burning eyes and skin, and corrosion of metal parts in the pool.
What does it mean when calcium hardness is low in a pool?
Low Calcium Hardness in pool water means that there is low calcium in the water and is considered "soft" and soft water tends to be corrosive. It will etch away and your plaster and any metal object the pool water touches.
