A laser cutter is used to cut acrylic plastics out.
The body was used as the earliest tool for measurement. Of the tools found by archaeologists, the oldest tool used for measurement was the compass. It was used to ensure two stones, when cut would fit together accurately. This aided in the pyramids construction.
this is a stupid question.
a Restriction Enzyme
OK IM NOT SURE YOU WORDED THIS RIGHT , BUT HERE IS WHAT I WOULD DO IF THE WIRES ARE CUT OFF AT THE CASE FROM YOUR STATER , PULL THE COVER OFF ON THE CASE, THERE YOU SHOULD BE ABLE TO SEE SOME OF THE WIRES LEFT. IF THERE PULLED LOOSE, CALL AROUND FOR USED BIKE PARTS IN THE YELLOW PAGES LOOK UNDER NEW AND USED BIKE PARTS SINCE YOUR BIKE IS AS OLD AS IT IS . BUT IF THERE ARE WIRES AVAILABLE YOU CAN SRINK WRAP TO TY NEW WIRES TO YOUR STATER , THIS WAY IT TAKES UP LESS ROOM . MATCH UP THE COLOR WIRES YOU HAVE THERE MAKE SURE YOU HAVE LONG ENOUGH WIRE TO ROUTE TO WARE YOU NEED TO GO TO REACH YOUR CDI.?
To strip electrical wires and to twist mutliple wires together.
This tool can be used to remove the casing off various types of wires. It can also be used to cut wires and bend wires as well. This can be used in several situations at home or in the office.
An electrician's knife has several uses. It is used to cut wires, cables and conductors, and strip them. It also can be used to cut open boxes holding electrical equipment.
An electrician's knife has several uses. It is used to cut wires, cables and conductors, and strip them. It also can be used to cut open boxes holding electrical equipment.
punch down
Match the wires by their color codes and splice them together with splice connectors and a crimping tool.
I use a utility knife to strip the outer insulator off the wire and then I use a wire stripper to strip the insulator off individual wires. I cut the wire with lineman's pairs.
First test to make sure it's not the headlight it's self that is broken then check for an shortage or cut in wires if no you can cut wires strip the plastic outline that protects it and put the right colored wires back together if not take it to a mechanic and get new wires
Its use to to insert wiring into 66 blocks or 110 blocks or patch panels. they are used for networking and also to cut wires mainly ethernet
Strip off insulation & crimp the ends that connect to your distributor cap, coil pack, etc.
To strip wire, you can use a wire stripper tool by adjusting it to the appropriate gauge of the wire, then placing the wire inside the tool and squeezing the handles to cut through the insulation. Another method is to use a utility knife to carefully cut around the insulation and then pull it off. Always be careful not to cut into the actual wire while stripping.
The tool you use for cutting wood is a a saw